FLEX 3 Diagram   

Product ID

• Model number: CAM-CAM-F03

Physical Characteristics

• Mounting: 0.635 cm (1/4”)-20 tripod thread
• Operating temperature: 0°C to +51°C (32°F to 123.8°F)
  • Note: Warm-up time of 30 minutes is recommended for optimal tracking performance. Watch out for condensation when used in temperatures below 0°C.
• Case: Aluminum and Polycarbonate
• Width: 4.52 cm (1.78”)
• Height: 7.47 cm (2.94”)
• Depth: 3.66 cm (1.44”)
• Weight: 100 g (4.2 oz)

Lens & Filter

• Stock lens: 5.5 mm F#1.8 (wide band AR coated)
  • Horizontal FOV: 56°
  • Vertical FOV: 46°
• Optional Lens: 8.0 mm F#1.8 (wide band AR coated)
  • Horizontal FOV: 42°
  • Vertical FOV: 34°
• Optional Lens: 3.5 mm F#1.8 (wide band AR coated)
  • Horizontal FOV: 82°
  • Vertical FOV: 70°
• Adjustable focus with wave spring assist
• 850nm band-pass filter
• 850nm (Infrared) / 700nm (Visible) Filter Switcher

Image Sensor

• Resolution: 1280 × 1024
• Frame Rate: 30–240Hz during focus modes, 100Hz during tracking mode
• Latency: 4.2 ms
• Shutter type: global
• Shutter speed:
  • Default: 0.5 ms (500 µs)
  • Minimum: 0.01 ms (10 µs)
  • Maximum: 3.9 ms (3,900 µs) at 240 FPS

Input/Output & Power

Data: USB 2.0
Synchronization: USB 2.0 (via Optisync)
Power: USB 2.0  

• Standard: 5V @ 490mA
• High Power: 680mA

BTSensor Functions

BTSensors are used to view BTBeacon positions in the Space. A BTBeacon's position in 3 dimensions (X, Y, and Z) can be determined when two or more BTSensors simultaneously have a direct line-of-sight to a connected Stringer’s LED. This information is then sent to the BTServer.

Attention:

Note that USB extensions of any kind are not suitable for connections between USB Sensors and the system's OptiHub.